CROSSING BEARERS BELGIUM
Smooth, even when it gets complicated !
What should you know about our Belgian Crossing Bearers?
General info
The Type P is the pre-stressed monobloc crossing bearer made of classic cement concrete and conforming to the European standard EN13230- 1 and 2 and the technical specification L25 of the Belgian railway company Infrabel. The bearer can be used for both the conventional and the high-speed rail network.
Extra: Equipped with USP according to European standard EN 16730 and Belgian railway company Infrabel’s technical specification L23.
Variants
Type P: Equipped with USP according to European standard EN 16730 and Belgian railway company Infrabel’s technical specification L23.
Type F: Equipped with drainage tubes.
Product specifications
Type P | |
---|---|
Length - standard: | P250 = 250cm P240 = 240cm P230 = 230cm |
Length - variable: | from 200cm to 480cm |
Max axle load: | 25 tonnes at V ≤ 120km/h 22,5 tonnes at V ≤ 220km/h 17 tonnes at V ≤ 350km/h |
Fixation type: | Fastening with underlay slabs |
Weight: | 150kg/m |
Rail Gauge: | 1435mm |
Inclination: | 1/∞ |
Rails: | UIC60 |
Type F | |
---|---|
Length - standard: | Depending on type max 250cm |
Length - variable: | from 200cm to 480cm |
Max axle load: | 25 tonnes at V ≤ 120km/h 22,5 tonnes at V ≤ 220km/h 17 tonnes at V ≤ 350km/h |
Fixation type: | Direct fixation type W14 |
Weight | 160kg/m |
Rail Gauge: | 1435mm |
Inclination - standard: | 1/∞ |
Inclination - variable: | 1/33; 1/50 or 1/∞ |
Rails: | 50E2 |
Want to know more?
Contact our expert